Hydraulic hoses and fittings
Alongside hydraulic hoses we stock water, air, hot water, suction, fuel, spraying, washdown and food hoses, hose fittings and adapters. Hose assemblies are crimped in our workshop or at the breakdown site with our mobile crimping vehicle. Every assembly gets a traceability tag, so the same one can be made again without taking measurements.
Hose, fitting and connection: one system
A hose line is more than the hose: the hose, the fittings at both ends, the adapter or nipple the fitting connects to, the sleeve that protects the line and the clamp that holds it all work together. If one of them is wrongly selected, even the best hose leaks or bursts early. That is why we select the line as a whole, not part by part: the fluid, pressure, temperature, routing and the thread type at both ends are considered together.
On hydraulic lines we select the hose by its standard type and inside diameter, select the fitting from the same system as the hose, and crimp them; on water, air, steam, fuel and chemical lines we select the hose according to the fluid. A photo of the layline on the old hose or of the fitting is usually enough for us to find the right equivalent.
The types, selection logic, tables and frequently asked questions of each group are on its own page:
123456- Outer cover: rubber resistant to abrasion, oil and weather
- Reinforcement, 1st layer: steel wire braid
- Intermediate layer: separates the reinforcement layers
- Reinforcement, 2nd layer: the number of layers defines the pressure class
- Inner tube: oil-resistant synthetic rubber
- Crimped fitting: selected to match the hose type and inside diameter
Product groups
Each group has its own page with types and a selection guide; sizes in stock and manufacturer part numbers are in our catalog.
- Hydraulic hoses →1SN, 2SN, 2SC, 4SP, 4SH, R15 and R6 hydraulic hoses, supplied by the meter or as crimped hose assemblies with fittings and a traceability tag.
- Industrial hoses →Water, air, hot water and steam, suction and delivery, fuel, spray and pressure washer, food, chemical and concrete hoses.
- Hydraulic fittings →Crimp hose fittings, DIN 2353 compression tube fittings, swivel, elbow and tee fittings, bulkhead fittings, quick couplings and flange connections; BSP, BSPT, metric and JIC threads.
- ORFS fittings →O-ring face seal (SAE J1453, ISO 8434-3) hose fittings, adapters, bulkhead fittings, blanking caps and ORFS O-rings.
- Hydraulic adapters and nipples →Male-to-male nipples, reducers, extensions, thread conversion adapters, elbow and tee adapters; BSP, metric, UNF and JIC threads.
- Hydraulic blanking plugs and caps →Socket head and hex head plugs, magnetic plugs, JIC and ORFS blanking caps and plastic protective plugs; BSP, metric and UNF threads.
- Hose protection and clamps →Plastic spiral guard, textile and fire sleeves, burst protection sleeves, hose and tube clamps, worm drive hose clamps and hose tails.
- Pneumatic tubing →Polyurethane, polyamide and PTFE tubing: for compressed air lines on the machine.
Hose crimping and traceability tag
We prepare hose assemblies in our workshop or at the breakdown site with our mobile crimping vehicle; the hose is crimped on site without dismantling and moving the machine. Every assembly we crimp gets a tag: the record holds the hose type, diameter, length, the fittings at both ends, the delivery date and a photo of the assembly. When a hose bursts, sending us the code on the tag is enough and we prepare the same one from the record.