Technical sprays
Cleaner, rust remover and multi-purpose oil sprays; MoS2, PTFE, silicone and food grade lubricants; zinc, galvanizing, aluminum and stainless steel protection sprays; leak detection, freeze, anti-spatter and electrical contact sprays.
In maintenance a spray is what gets reached for most often: to free a seized nut, clean a contact, protect a weld or find a leak. We select the right spray for the job in the workshop and in the field, and recommend an approved product for special conditions such as food areas. We ship technical sprays from stock across Türkiye and abroad, and also sell them through hidroticaret.com, our online store (Turkish).
Types
Cleaner sprays
Removes oil, grease and dirt without residue; metal, surface, brake and electronic contact cleaners.
Rust remover and multi-purpose sprays
Loosens seized and rusted parts, displaces moisture and protects.
Lubricant sprays
MoS2, PTFE and silicone based, resistant to high pressure; food grade (H1) types.
Corrosion protection sprays
Zinc, galvanizing, aluminum and stainless steel coating sprays; protection of welds and cut edges.
Leak detection sprays
A spray that foams on compressed air and gas lines and shows the leak.
Freeze sprays
Shrinks the part by sudden cooling; for dismantling tight fitting parts and for fault finding.
Anti-spatter sprays
Prevents weld spatter from sticking to the torch and the workpiece.
Insulating and electrical sprays
Insulating lacquers and contact sprays that protect electrical connections against moisture and corrosion.
How to select
A spray is selected for the job to be done: expecting cleaning, lubrication and protection from the same can usually means doing none of them well. The table below matches common jobs with the suitable spray type.
In food, pharmaceutical and cosmetics production areas only food grade (H1) or NSF approved products are used. For electrical and electronic parts, non-conductive cleaners that leave no residue are selected.
Zinc and galvanizing sprays give cathodic protection to areas where the galvanized coating has been damaged by welding and cutting; the surface is cleaned before application.
Spray selection by job
| Job | Spray type |
|---|---|
| Freeing seized, rusted nuts and bolts | Rust remover / multi-purpose spray |
| Removing oil and dirt without residue | Cleaner spray |
| Cleaning electrical contacts | Electrical contact cleaner |
| Lubricating chains, guides and high load points | MoS2 or fluid grease spray |
| Lubricating food machinery | Food grade (H1) lubricant |
| Protecting welds against corrosion | Zinc or galvanizing spray |
| Finding air and gas leaks | Leak detection spray |
| Dismantling tight fitting parts | Freeze spray |
Frequently asked questions
Is a rust remover the same as a lubricant?
No. A rust remover is thin and penetrating, made to loosen a seized part; a lubricant spray is used for lasting lubrication.
Which spray is used on food machinery?
Products marked as food grade (H1) or NSF approved.
How is leak detection spray used?
It is sprayed onto the pressurized joint; if there is a leak, foam forms.
Can a cleaner be used on electronic boards?
Yes, with contact cleaners made for electronics that are non-conductive and leave no residue.
Stock, sizes and part numbers
We select and supply the products in this group according to the application. Send us your requirement, the size and the operating conditions on WhatsApp and we will recommend the right product.