Industrial cleaners and maintenance fluids
Industrial, workshop, parts, mold and plastic cleaners; food grade cleaners and lubricants, cutting oil, mold release agent, corrosion inhibitor, rust converter and protective coatings.
Half of maintenance is cleaning: neither adhesive nor paint holds on a surface that has not been degreased. From the workshop to food production we select the cleaner and maintenance fluid to suit the job and the surface, and recommend canister and bulk pack products according to the maintenance schedule. We ship cleaners and maintenance fluids from stock across Türkiye and abroad, and also sell them through hidroticaret.com, our online store (Turkish).
Types
Industrial and workshop cleaners
Removes oil, grease and dirt from metal, plastic and glass surfaces; solvent based and solvent free types.
Parts and mold cleaners
Cleaning of parts before assembly and of plastic, steel and aluminum molds.
Sensitive surface cleaners
Cleaners that do not damage plastic, rubber and powder coated surfaces.
Food grade cleaners and lubricants
NSF approved cleaners and pure lubricants for food, pharmaceutical and cosmetics production.
Cutting oils and multi-purpose oils
Biodegradable cutting oil, multi-purpose oil with PTFE.
Mold release agents and anti-spatter fluids
Silicone free mold release agent and weld anti-spatter fluids.
Corrosion inhibitors and rust converters
Transparent protection for bare metal parts; fluids that convert rust on a rusty surface and form a primer.
Protective coatings
Aluminum and zinc coating paints; metal surface protection against corrosion and wear.
How to select
A cleaner is selected according to the type of soil and the surface. Strong solvent based cleaners are effective on metal but attack some plastics and paints; a plastic cleaner is used on sensitive surfaces. The table below shows selection by surface.
Before bonding, painting and applying liquid gasket, the surface must be degreased with a residue free cleaner; a cleaner that leaves residue prevents the next step from adhering.
In food and pharmaceutical production areas only NSF approved or food grade products are used. For cutting and mold work, biodegradable and silicone free products are preferred for occupational health and waste reasons.
Cleaner selection by surface
| Surface / job | Suitable cleaner | Note |
|---|---|---|
| Metal parts, before assembly | Parts and assembly cleaner | Residue free type; before bonding and gasketing |
| Plastic, rubber, powder coating | Plastic cleaner | Solvent based cleaners can damage the surface |
| Molds | Mold cleaner | Compatibility with the mold material is checked |
| Food production areas | NSF approved fast cleaner | Approved products only |
| General workshop cleaning | Workshop cleaner (solvent free) | Dilution ratio depends on the product |
Frequently asked questions
Which cleaner leaves no residue?
Surface and parts cleaners evaporate quickly and leave no residue; these are used before bonding and liquid gasket application.
Which cleaning products are used in food areas?
Cleaners and lubricants marked as NSF approved or food grade.
What is the difference between a rust converter and a rust remover?
A rust remover loosens a seized, rusted part; a rust converter neutralizes the rust on the surface and forms a primer ready for painting.
Why should a mold release agent be silicone free?
Silicone residue prevents later painting and bonding operations from adhering.
Stock, sizes and part numbers
We select and supply the products in this group according to the application. Send us your requirement, the size and the operating conditions on WhatsApp and we will recommend the right product.